Zinc Stearate Release Agent for challenging applications
Stoner E474 Zinc Stearate Mold Release is a dry powder, heavy-duty release agent and anti-stick lubricant and is successfully applied as the first choice solution by international plastic processing manufacturers for challenging releases of molded plastics, rubber, and similar materials.
With E474 Zinc Stearate Release Agent molded parts can be painted, plated, hot stamped, adhesive bonded, labeled or otherwise decorated in most applications. Being a silicone-free release agent, Stoner E474 is generally considered suitable for applications that require a food grade mold release solution.
Zinc Stearate Mold Release is ideal for testing new molds. It provides a heavy duty and long lasting anti-stick film for a fast and easy removal of parts from molds as well as multiple part releases per application. In general, the application of a thin anti-stick-coat is sufficient to ensure a safe and efficient release after molding.
High Performance Zinc Stearate Release Agent
Stoner E474 Zinc Stearate Mold Release is the best solution for various plastic resins even at high molding temperatures. The easy-to-use aerosol spray can enables users to efficiently and accurately prepare molds and tools prior to production starts. With its leading spray head technology even most challenging areas can be prepared effectively and evenly. Upon request, selected products are also available in different container sizes.
- injection molding, vacuum molding or pour cast molding
- formulated for tool temperatures of max. 315°C
- best choice for ABS, Acetal, Acrylic, Nylon, Polycarbonate, Polyethylene, Polypropylene, Polystyrene or PVC
- user-firendly aerosol spray can
Benefits of Stoner E474:
- Saves time and increases efficiency by supporting quick and easy part removal from molds.
- Allows molded parts to be painted, hotstamped, or otherwise decorated.
- Improves part appearance and reduces defects caused by sticking.
- Formulated to provide high levels of user and environmental safety.
- Contains no Class I or Class II Ozone Depleting Substances.
- Contains no chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) propellants.
- Contains no chlorinated solvents such as 1,1,1 trichloroethane or methylene chloride.
- Colorless and non-staining.
Areas of Application:
- Formulated for the release of molded ABS, Acetal, Acrylic, Nylon, Polycarbonate, Polyethylene, Polypropylene, Polystyrene or PVC products
- Ideal for testing new molds and forms
Direction for Use:
- Shake well before using
- Should be applied to a clean mold, free of any previous mold release or other residues.
- Made for temperatures of max. 315° C
- Hold can 25 to 30 cm from surface to be sprayed
- Apply a thin coating on mold surface for best results
- Shake well between applications
Storage and Handling:
- Note the security descriptions and application advises in the security data sheets and on the product
- Container is under pressure and must not be punctured or incinerated.
- Container must not be exposed to heat, direct sun light, open fire or sparks.
| Range of Application: | ABS, Acetal, Acrylic, Nylon, Polycarbonate, Polyethylene, Polypropylene, Polystyrene, PVC |
| Applications: | Release Agent, Anti-stick lubricant |
| Content: | 431 ml , 431 ml | 12 Oz. |
| Product Type: | Aerosol |
| Silicone Free: | yes |
| Paintable: | yes |
| Solvent: | yes |
| Water Based: | no |
| FDA / GRAS: | yes |
| Flammable: | yes |
| max. Tool Temperature: | 120°C, 160°C, 200°C, 240°C, 260°C, 315°C |
