Portable high performance Dry Ice Blasting Device
The DC 50 Vario Blaster offers all the benefits of cleaning with dry ice at low investment costs. It is suitable for applications with light to medium cleaning performance and is easy to handle and transportable. Due to its low air consumption, only small compressors are required for the compressed air supply.
All devices in the Vario Line include the patented Vario grinder, which allows you to adjust the size of the dry ice particles in three stages (0.4 / 0.8 / 2.0 mm). In addition to the particle size, the air pressure and the amount of dry ice, which is supplied to the airflow, are both essential for the cleaning performance. Of course, you can adjust both on the device in order to achieve an optimum cleaning effect.
For the devices of the Vario Line, the airflow as well as the blasting guns and nozzles were further optimized, so that the good cleaning performance of the Classic Line devices is significantly exceeded in some cases. This saves you time and dry ice.
The AirPlus system also prevents freezing of the machine, so that all devices are suitable for continuous operation. It is excellently suited for all applications from mild to strong cleaning performance and can be optimally adapted to the cleaning task due to its adjustment possibilities for pressure, ice rate and particle size. Are you looking for a dry ice blasting device that you can use for a variety of cleaning tasks as flexibly as possible? Then you are well served with our DC 50 Vario Blaster for light to medium cleaning performance.
Benefits
- Unique Vario grinder for light, medium and strong cleaning power with a single device
- Handy, easy to transport
- Suitable for continuous operation
- Reliable, robust and low-maintenance
- Made in Germany
- Economically by two-hose system
A flexible device for all occasions
With its unique, patented grinder that allows you to adjust the size of the dry ice particles in three stages 0.4 / 0.8 / 2.0 mm, the DC 50 Vario Blaster is suitable for a variety of cleaning tasks and therefore more flexible than any other device on the market. Whether you want to clean the inside of an automobile or die casting molds in the plastics processing industry: With only a few steps, you can optimally adjust the DC Vario 50 Blaster to the upcoming cleaning task.
Economical due to low investment and low consumption
The DC Vario 50 Blaster is a two-hose system, i.e. compressed air and dry ice are supplied in separate hoses and only mixed in the blast gun. The loss of dry ice by sublimation in the hose is substantially lower than for a one-hose system. This and the low required volume of compressed air make the DC 50 Vario Blaster one of the most efficient equipment in its class.
| Applications: | Dry Ice Blasting |
| Dimensions (H x W x L): | 33.5 cm x 30.8 cm x 43.0 cm |
| Dead Weight: | 20 kg |
| Maximum Input Pressure: | 10 bar |
| Minimum Input Pressure: | 2 bar |
| Noise Emission (max.): | 99.5 db |
| Volumetric Flow Rate of Compressed Air: | 590 l/min – 2,350 l/min |
| Connection: | Fast Coupling, rated width 10.0 |
